Cleaning/Maintenance Tips: |
• | Unplug and let the unit cool before cleaning. |
• | Wash the removable cooking pot with warm soapy water. Rinse and dry thoroughly. |
• | Wipe the outer housing and lid with a clean cloth. Do not submerge in water. |
• | Remove the condensation reservoir by pulling down. Clean with warm, soapy water. Rinse and dry thoroughly. Replace by pushing up. |
• | Turn the lid upside down, grasp the silicone gasket on either side and pull up. Clean the silicone gasket in warm soapy water. Rinse and dry thoroughly. Replace the gasket by pushing it down inside the edge of the lid. Make sure the groove in the centre of the gasket is positioned around the metal ring on the inside edge of the lid. If the gasket is not positioned properly, the unit will not work. |
• | In order to maintain good performance of your cooker, the bottom of the removable cooking pot in the area of the sensor pad must be cleaned after each use. Wipe with a soft damp cloth and be sure to dry thoroughly. |
• | Never use abrasive cleaners or scouring pad to clean any of the parts. |
| NOTE: The silicone gasket must always be properly positioned on the underside of the lid. Check periodically to make sure that it is clean, flexible and not cracked or torn. If silicone gasket is damaged, replace it before using the cooker. |
No comments:
Post a Comment